1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
4

Measures For Prevention

For "Bubbles" or "Air Pockets" check the following :
  • Ensure proper conditioning of component materials for a minimum of 48 hours before pasting.
  • Ensure sufficient amount of adhesive on both the surfaces to be bonded.
  • Ensure sufficient pressure to be applied over the entire area. Recommended pressure of 2.8 Kgs per centimeter square to be applied on bonded assembly.
  • Ensure adequate care while bonding such that adhesive surface are not "Over-dry" or "Under dry". Follow Adhesive manufacturer's recommendations.
  • The ideal ambient temperature for bonding should be above 21 degrees C (70 degrees F).
  • Take adequate care of the gluing surface, which should be clean, dry and free of oils or any other contaminants.
  • Ensure adhesive is agitated or stirred properly before using.
  • Limit vertical is agitated or stirred properly before using.
  • Limit vertical application of maximum sheet size of 610x2440 mm (2x8 feet)
  • Ensure expansion space in-between two laminate joints.
For "Cracking of Laminate" check the following :
  • Ensure proper conditioning of Laminate/ Plywood.
  • Ensure proper bonding.
  • Ensure expansion of space.
  • Poor Planning: due to rough/chipped edges, sharp corners, forced fittings, inside corners not bee radisued, usage of nails instead of drilling, foreign objects in the glue line, etc.

Technical Specifications IS: 2046

Benefits Silicon Digital Laminate:

  • Design you dream is the design you can get
  • Flexibility of getting even a single Digital Laminate sheet of your choicest design
  • Designs only limited to imagination! First time, one can think of putting even own photos in furniture surface decor
  • 100% customized design, highest certified quality yet in affordable range
  • Now, corporate offices can think of using customized laminate designs based on their logo and house colours.
  • These laminates are completely 'Maintenance Free'.
  • Unlike other design materials which have to be bought in certain fixed sizes leading to wastage, Silicon Digital Laminates can be ordered even for one laminate and that too can be cut & used as per requirement.

How to get Customized Laminate Design:

It's simple. Just send the photograph/ scenery/ art you want to get printed in the laminate to us in CDR/JPG/TIFF/PSD format in 300 DPI.

Size : Since the panels are available in 8x4 ft so the design must be 8x4 ft. One panel can have more than one design also, depending upon requirement. You may request our CD presentation for more information.

How to apply: It is like using any other laminate. Your friendly neighborhood carpenter can cut & fix it in no time.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48